INDUSTRIAL GAS DETECTION
MODEL 1500
EasyCal TRANSMITTER

SMS MODEL 1500 EasyCal TRANSMITTER Features

  • Simple Non-Intrusive Calibration
  • 24VDC Power Input
  • 4-20mA Analog OR RS485 Digital Output Signal
  • Bright Red LED Display
  • Visual Indicators For Alarm And Fault Status
  • User Programmable Alarm Settings
  • Smart Diagnostics
  • Support For Catalytic Bead Or Electrochemical Sensors
  • Optional Alarm And Fault Relays

The KAREKEEPER® Model 1500 EasyCal transmitter is a versatile instrument that offers the flexibility of a stand alone or a multiple sensor setup. The controller has built in signal conditioning for a 4-20mA or RS485 digital signal output. A bright red three digit, seven segment LED display shows the sensor reading while being identified by a bright red two digit, seven segment LED display. Alarm and fault status are indicated by four bi-color (red/green) LED's.

The Model 1500 EasyCal transmitter is available with combustible, oxygen or toxic gas detection sensors using catalytic bead or electrochemical. Depending upon the sensor element selected, the Model 1500 EasyCal transmitter supports a variety of full-scale displays. The LED display allows easy identification when several transmitters are mounted to a single controller in a LAN RS485 format. The Model 1500 EasyCal transmitter detects the gas and a signal is transmitted to the controller then displayed on the transmitter and the controller. Should the monitor go into alarm the bi-color L.E.D.'s will show the alarm status with the color of the L.E.D. allowing easy identification of each alarm range setting or circuitry failure.

TECHNICAL SPECIFICATIONS


Available Gases And Ranges: Combustible Gases; LEL 0-50%
Ammonia NH 30-200 ppm
Carbon Monoxide; CO 0-100 ppm
Carbon Monoxide; CO 0-500 ppm
Hydrogen Sulfide; H2S 0-50 ppm
Hydrogen Sulfide; H2S 0-100 ppm
Hydrogen Cyanide; HCN 0-50 ppm
Nitric Oxide ; NO 0-100 ppm
Nitrogen Dioxide; NO 20-20 ppm
Sulfur Dioxide; SO 20-20 ppm
Sulfur Dioxide; SO 20-100 ppm
Oxygen; O2 17 - 23%
Sensor Type: Catalytic Bead, Electrochemical Sensor Or Metal Oxide
Alarm Settings: Factory Programmed With Optional Settings
Visual Alarm Indicators: Green, Power; Amber, Low; Red, Hi, Hi-Hi And Fault On Display
Power Source: 125VAC, 12 Volt Or 24 Volt DC
Display: Five-Digit L.E.D. Display
Enclosure: Poly Ester Fiber Glass NEMA 4X Enclosures
Operation Temperatures: -40C To 50C
Warranty: One -Year Electronics, Sensor Depends On Type Of Gas Selected

 

MANUFACTURED BY

STANDBY MONITORING SYSTEMS, INC.
2131 KERMIT HWY.
ODESSA, TEXAS 79761
PH: (432) 334-6105 TOLL FREE: 1-888-527-3533 FAX: (432) 334-0555
www.standbymonitoring.com


 

 

Home ] KAREKEEPER Model 10 ] SMS 500X ] KAREKEEPER Model LDX-400 Controller ] KAREKEEPER Model 420 Controller ] KAREKEEPER Model 2000 Controller ] KAREKEEPER Model 1000 Transmitter ] KAREKEEPER Model 1100 Transmitter ] [ KAREKEEPER Model 1500 EasyCal Transmitter ] KAREKEEPER Model 1210 Analyzer ] SMS 100 Calibrator ] EyeSpy Flame Detectors ] Aero-K Fire Supression Generators ] INFITRON INC. ]

[FINCH-PAC] [FINCH-FL] [FINCH-COM II] [FINCH-MONO II]